HeartStart FR3, ECG Bundle w/ FAA-Compliant Battery

$0.00

PHI861389-A01

Built for speed - Reduces deployment time
The HeartStart FR3 automatically powers on when you open the carry case so you can focus on pad placement. Pre-connected peel and place SMART Pads III, with no foil pouch to open, reduce deployment time.

Small and lightweight - Easy to carry along with other equipment
As the smallest and lightest professional-grade AED available among leading global manufacturers, the HeartStart FR3 weighs only 3.5lbs (1.6kg). It is designed to be rugged, reliable, and ready to use.

SMART CPR - Patient specific treatment advice
Receive patient-specific guidance with Philips SMART CPR for the most appropriate initial therapy – CPR or defibrillation – even for shockable rhythms.

Bright display - High resolution LCD screen for clarity
In severely degraded environmental conditions, voice prompts may not provide enough guidance. The bright, color LCD display of the HeartStart FR3 clearly shows text or text with ECG.

Infant/Child key - Simplify the rescue of a child
Insert the Infant/Child Key to automatically decrease the defibrillation therapy and implement the configured infant/child CPR protocols.

Data management - Download and forward event data
Having event data readily available can help facilitate retrospective review by medical directors and program managers. Philips portfolio of data management solutions supports a culture of continuous improvement and excellence.

Quick Shock Feature - Minimize chest compression interruptions
CPR is even more vital to survival than previously realized. Rapidly delivering a shock after chest compressions is critical. The HeartStart FR3’s Quick Shock feature reduces the time between hands-off and shock delivery.

5-year manufacturer's warranty.

Included:

  • 1 FR3 AED
  • 1 Primary battery
  • 1 Set SMART Pads III
  • Printed Instructions w/ Setup Guide and CD-ROM for Administrative Reference

Specifications:

Waveform:
SMART biphasic Truncated Exponential waveform parameters adjust as a function of patient impedance. Adult nominal peak current 32A (150J into a 50 ohm load); pediatric nominal peak current 19A (50J into a 50 ohm load) using optional Infant/Child Key

Shock delivery:
Via defibrillator pads placed in the anterior-anterior (Lead II) position for adults; anterior-posterior position for infants and children under 55 lbs (25 kg) or 8 years old

Controls:
On/Off button, shock button, option buttons. Auto-On feature, when used with the optional FR3 carry case, enables FR3 to power up when case lid is opened

Indicators:
High-resolution color LCD, beeper, voice prompts, tones and chirps, audio speaker, connector socket, ready light, shock button

Advanced Mode:
Configurable using optional HeartStart Configure software

Patient analysis system:

  • ECG analysis: Evaluates impedance of defibrillator pads for proper contact with patient skin, evaluates the ECG rhythm and signal quality to determine if a shock is appropriate; also detects artifact and pacemaker
  • SMART CPR: Evaluates key characteristics of the presenting VF and determines the initial therapy: shock first, or CPR first quickly followed by a shock
  • Sensitivity/specificity: Meets AAMI DF80 requirements and AHA recommendations for adult defibrillation
  • Quick Shock: Typically arms in <8 seconds from the end of the "Stop CPR" prompt

Environmental/physical requirements:

  • Sealing: Meets IEC529 class IP55 with battery installed
  • Temperature: Operating/standby: 32°–122°F (0°– 50°C)
  • Altitude: 0 –15,000 feet (0 –4,572 meters)
  • Shock/drop: Meets MIL-STD-810F 516.4, Procedure IV
  • Abuse tolerance: (After a ibe-meter drop to any edge, corner, or surface in standby mode)
  • Vibration: Meets MIL-STD-810F 514.5 C-17

FR3 primary battery:

  • Type: 12 VDC, 4.7 Ah, lithium manganese dioxide long-life primary cells
  • Capacity: Typically 300 shocks or 12 hours of operating time at 77° F (25° C) when configured for monitoring after No Shock Advised (NSA)
  • Standby life: 3 years minimum when stored under standby environmental conditions (battery installed)
  • Shelf life: 5 years

Automated and user-activated self-tests:

  • Automatic self-tests: Test internal circuitry, waveform delivery system, ECG acquisition, temperature, status (or readiness) of attached accessories (SMART Pads III and FR3 data card) and battery
  • Automated self-test frequency Daily, weekly, monthly, power on, and runtime during all modes of operation
  • User initiated tests:Automatic self-tests plus tone, display, and button performance

Dimensions:

  • Height: 2.7" / 6.9 cm
  • Width: 5.3" / 13.5 cm
  • Depth: 8.7" / 22.1 cm

Weight:

  • 3 lbs 8 oz / 1.6 kg with FR3 standard battery installed
Quantity:
Add To Cart

PHI861389-A01

Built for speed - Reduces deployment time
The HeartStart FR3 automatically powers on when you open the carry case so you can focus on pad placement. Pre-connected peel and place SMART Pads III, with no foil pouch to open, reduce deployment time.

Small and lightweight - Easy to carry along with other equipment
As the smallest and lightest professional-grade AED available among leading global manufacturers, the HeartStart FR3 weighs only 3.5lbs (1.6kg). It is designed to be rugged, reliable, and ready to use.

SMART CPR - Patient specific treatment advice
Receive patient-specific guidance with Philips SMART CPR for the most appropriate initial therapy – CPR or defibrillation – even for shockable rhythms.

Bright display - High resolution LCD screen for clarity
In severely degraded environmental conditions, voice prompts may not provide enough guidance. The bright, color LCD display of the HeartStart FR3 clearly shows text or text with ECG.

Infant/Child key - Simplify the rescue of a child
Insert the Infant/Child Key to automatically decrease the defibrillation therapy and implement the configured infant/child CPR protocols.

Data management - Download and forward event data
Having event data readily available can help facilitate retrospective review by medical directors and program managers. Philips portfolio of data management solutions supports a culture of continuous improvement and excellence.

Quick Shock Feature - Minimize chest compression interruptions
CPR is even more vital to survival than previously realized. Rapidly delivering a shock after chest compressions is critical. The HeartStart FR3’s Quick Shock feature reduces the time between hands-off and shock delivery.

5-year manufacturer's warranty.

Included:

  • 1 FR3 AED
  • 1 Primary battery
  • 1 Set SMART Pads III
  • Printed Instructions w/ Setup Guide and CD-ROM for Administrative Reference

Specifications:

Waveform:
SMART biphasic Truncated Exponential waveform parameters adjust as a function of patient impedance. Adult nominal peak current 32A (150J into a 50 ohm load); pediatric nominal peak current 19A (50J into a 50 ohm load) using optional Infant/Child Key

Shock delivery:
Via defibrillator pads placed in the anterior-anterior (Lead II) position for adults; anterior-posterior position for infants and children under 55 lbs (25 kg) or 8 years old

Controls:
On/Off button, shock button, option buttons. Auto-On feature, when used with the optional FR3 carry case, enables FR3 to power up when case lid is opened

Indicators:
High-resolution color LCD, beeper, voice prompts, tones and chirps, audio speaker, connector socket, ready light, shock button

Advanced Mode:
Configurable using optional HeartStart Configure software

Patient analysis system:

  • ECG analysis: Evaluates impedance of defibrillator pads for proper contact with patient skin, evaluates the ECG rhythm and signal quality to determine if a shock is appropriate; also detects artifact and pacemaker
  • SMART CPR: Evaluates key characteristics of the presenting VF and determines the initial therapy: shock first, or CPR first quickly followed by a shock
  • Sensitivity/specificity: Meets AAMI DF80 requirements and AHA recommendations for adult defibrillation
  • Quick Shock: Typically arms in <8 seconds from the end of the "Stop CPR" prompt

Environmental/physical requirements:

  • Sealing: Meets IEC529 class IP55 with battery installed
  • Temperature: Operating/standby: 32°–122°F (0°– 50°C)
  • Altitude: 0 –15,000 feet (0 –4,572 meters)
  • Shock/drop: Meets MIL-STD-810F 516.4, Procedure IV
  • Abuse tolerance: (After a ibe-meter drop to any edge, corner, or surface in standby mode)
  • Vibration: Meets MIL-STD-810F 514.5 C-17

FR3 primary battery:

  • Type: 12 VDC, 4.7 Ah, lithium manganese dioxide long-life primary cells
  • Capacity: Typically 300 shocks or 12 hours of operating time at 77° F (25° C) when configured for monitoring after No Shock Advised (NSA)
  • Standby life: 3 years minimum when stored under standby environmental conditions (battery installed)
  • Shelf life: 5 years

Automated and user-activated self-tests:

  • Automatic self-tests: Test internal circuitry, waveform delivery system, ECG acquisition, temperature, status (or readiness) of attached accessories (SMART Pads III and FR3 data card) and battery
  • Automated self-test frequency Daily, weekly, monthly, power on, and runtime during all modes of operation
  • User initiated tests:Automatic self-tests plus tone, display, and button performance

Dimensions:

  • Height: 2.7" / 6.9 cm
  • Width: 5.3" / 13.5 cm
  • Depth: 8.7" / 22.1 cm

Weight:

  • 3 lbs 8 oz / 1.6 kg with FR3 standard battery installed

PHI861389-A01

Built for speed - Reduces deployment time
The HeartStart FR3 automatically powers on when you open the carry case so you can focus on pad placement. Pre-connected peel and place SMART Pads III, with no foil pouch to open, reduce deployment time.

Small and lightweight - Easy to carry along with other equipment
As the smallest and lightest professional-grade AED available among leading global manufacturers, the HeartStart FR3 weighs only 3.5lbs (1.6kg). It is designed to be rugged, reliable, and ready to use.

SMART CPR - Patient specific treatment advice
Receive patient-specific guidance with Philips SMART CPR for the most appropriate initial therapy – CPR or defibrillation – even for shockable rhythms.

Bright display - High resolution LCD screen for clarity
In severely degraded environmental conditions, voice prompts may not provide enough guidance. The bright, color LCD display of the HeartStart FR3 clearly shows text or text with ECG.

Infant/Child key - Simplify the rescue of a child
Insert the Infant/Child Key to automatically decrease the defibrillation therapy and implement the configured infant/child CPR protocols.

Data management - Download and forward event data
Having event data readily available can help facilitate retrospective review by medical directors and program managers. Philips portfolio of data management solutions supports a culture of continuous improvement and excellence.

Quick Shock Feature - Minimize chest compression interruptions
CPR is even more vital to survival than previously realized. Rapidly delivering a shock after chest compressions is critical. The HeartStart FR3’s Quick Shock feature reduces the time between hands-off and shock delivery.

5-year manufacturer's warranty.

Included:

  • 1 FR3 AED
  • 1 Primary battery
  • 1 Set SMART Pads III
  • Printed Instructions w/ Setup Guide and CD-ROM for Administrative Reference

Specifications:

Waveform:
SMART biphasic Truncated Exponential waveform parameters adjust as a function of patient impedance. Adult nominal peak current 32A (150J into a 50 ohm load); pediatric nominal peak current 19A (50J into a 50 ohm load) using optional Infant/Child Key

Shock delivery:
Via defibrillator pads placed in the anterior-anterior (Lead II) position for adults; anterior-posterior position for infants and children under 55 lbs (25 kg) or 8 years old

Controls:
On/Off button, shock button, option buttons. Auto-On feature, when used with the optional FR3 carry case, enables FR3 to power up when case lid is opened

Indicators:
High-resolution color LCD, beeper, voice prompts, tones and chirps, audio speaker, connector socket, ready light, shock button

Advanced Mode:
Configurable using optional HeartStart Configure software

Patient analysis system:

  • ECG analysis: Evaluates impedance of defibrillator pads for proper contact with patient skin, evaluates the ECG rhythm and signal quality to determine if a shock is appropriate; also detects artifact and pacemaker
  • SMART CPR: Evaluates key characteristics of the presenting VF and determines the initial therapy: shock first, or CPR first quickly followed by a shock
  • Sensitivity/specificity: Meets AAMI DF80 requirements and AHA recommendations for adult defibrillation
  • Quick Shock: Typically arms in <8 seconds from the end of the "Stop CPR" prompt

Environmental/physical requirements:

  • Sealing: Meets IEC529 class IP55 with battery installed
  • Temperature: Operating/standby: 32°–122°F (0°– 50°C)
  • Altitude: 0 –15,000 feet (0 –4,572 meters)
  • Shock/drop: Meets MIL-STD-810F 516.4, Procedure IV
  • Abuse tolerance: (After a ibe-meter drop to any edge, corner, or surface in standby mode)
  • Vibration: Meets MIL-STD-810F 514.5 C-17

FR3 primary battery:

  • Type: 12 VDC, 4.7 Ah, lithium manganese dioxide long-life primary cells
  • Capacity: Typically 300 shocks or 12 hours of operating time at 77° F (25° C) when configured for monitoring after No Shock Advised (NSA)
  • Standby life: 3 years minimum when stored under standby environmental conditions (battery installed)
  • Shelf life: 5 years

Automated and user-activated self-tests:

  • Automatic self-tests: Test internal circuitry, waveform delivery system, ECG acquisition, temperature, status (or readiness) of attached accessories (SMART Pads III and FR3 data card) and battery
  • Automated self-test frequency Daily, weekly, monthly, power on, and runtime during all modes of operation
  • User initiated tests:Automatic self-tests plus tone, display, and button performance

Dimensions:

  • Height: 2.7" / 6.9 cm
  • Width: 5.3" / 13.5 cm
  • Depth: 8.7" / 22.1 cm

Weight:

  • 3 lbs 8 oz / 1.6 kg with FR3 standard battery installed